CA80 BMW R80-R100-GS Plug-and-Play : 100mm diameter speedometer to fit BMW R80 R100 GS G/S Plug and Play

The BMW R80 R100 GS G/S Plug and Play gauge comes with several scale options for both speed in MPH and RPM.
The dash is designed to be fitted into the original headlight binnacle.
The speedometer is plug and play for speed sensor, power supply and RPM. The warning lamps can be connected but will need to be "piggy backed" onto the wires that connect to the original warning lamps.

Please note the shape of the binnacle in the photographs. If you do not have the binnacle the same as shown it will not fit.
It will not plug and play in the binnacle that has a speedo and rev counter mounted side-by-side, it needs to be hard wired instead and the optional 103mm mounting ring is required.

The plug-and-play connector uses the connector that the OEM rev counter / tacho plugs into. If you need to retain the original electronic tacho then choose the optional loop-through connector to give a male and female round 4 pin connector.